|I had the chassis floating on silicone blocks to isolate from plinth, but later found the rumble excessive. Rumble reduced dramatically when chassis bolted to plinth (the manual confirms this need)
|This turntable was sold under various labels. The shifter housing is a separate aluminum piece. Some versions reveal the seam between housing and chassis, but Collins filled the gap with a Bondo-like material.
|Bodine Motor. New idler and motor shockmounts from russcoturntables.com
|signal ground is isolated from chassis ground
|3 speed shift, neon indicator and standard bat switch
|MicroTrack tone arm is unusual, all aluminum. Most have wooden arms
|Front Collins Emblem was a nice find.
|Brass wafer weights under cartridge. Heads can be interchanged without adjusting rear weight.
|signal wire internal RCA connections.
|internal power connector